Installation, Operation and Care of

GAS RESTAURANT RANGES 90 SERIES AND VG SERIES

PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE

GENERAL

Vulcan ranges and ovens are produced with quality workmanship and material. Proper installation, usage and maintenance of your range will result in many years of satisfactory performance.

Vulcan-Hart suggests that you thoroughly read this entire manual and carefully follow all of the instructions provided.

INSTALLATION

UNCRATING

This range was inspected before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking, check for possible shipping damage. If the range is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Uncrate unit carefully and place in a work-accessible area as near to its final installed position as possible. Remove all shipping wire and wood blocking.

Before installing, check the electrical service (convection oven series ranges only) and type of gas supply (natural or propane) to make sure they agree with the specifications on the rating plate located on the inside of the lower kick panel. If the supply and equipment requirements do not agree, do not proceed with the installation. Contact your dealer or Vulcan-Hart Company immediately.

LOCATION

The equipment area must be kept free and clear of combustible substances.

The range, when installed, must have a minimum clearance from combustible construction of 6" (152.4 mm) at the sides and 6" (152.4 mm) at the rear. Clearance from non-combustible construction is 0" at the sides and 6" (152.4 mm) at the rear.

The installation location must allow adequate clearances for servicing and proper operation. A minimum front clearance of 40" (101.6 cm) is required.

The range must be installed so that the flow of combustion and ventilation air will not be obstructed. Adequate clearance for air openings into the combustion chamber must be provided. Make sure there is an adequate supply of air in the room to allow for combustion of the gas at the burners.

— 6 —

Page 6
Image 6
Vulcan-Hart 24L, VG48, VG160, VG36, VG24, VG60, VG260, 481L, 48L, 36L, 160L, 260L Installation, Uncrating, Location

260L, 160L, 36L, 60L, 48L specifications

Vulcan-Hart is a trusted name in the commercial kitchen equipment industry, renowned for its high-quality products designed to meet the demanding needs of foodservice operators. Among their distinguished offerings are the Vulcan-Hart VG series of gas burners: VG48, VG160, VG36, VG24, and VG60. These models are tailored for various cooking applications, ensuring versatility and reliability in any kitchen setting.

The Vulcan-Hart VG series features powerful, efficient burners that deliver consistent heat for optimal cooking performance. Each model's output varies based on its size, with the VG160 boasting the highest BTU output, capable of handling heavy-duty cooking requirements, while the smaller VG24 model suits establishments with limited space or lower volume cooking needs. Despite size differences, all models are designed to provide a high level of energy efficiency, which translates into lower operating costs for foodservice operators.

One of the standout features of the VG series is its heavy-duty construction. Built with stainless steel exteriors, these burners are not only aesthetically pleasing but also durable, resisting corrosion and wear from daily use. The cast iron grates provide excellent heat retention and distribution, ensuring that food cooks evenly and efficiently. Additionally, the open burner design allows for easy cleaning and maintenance, a critical factor in busy kitchens.

Technologically, the Vulcan-Hart VG series incorporates innovative features such as adjustable burner flames, allowing chefs to control heat levels precisely. This flexibility is essential for various cooking methods, from simmering sauces to boiling pasta. The series also includes models compatible with various gas types, ensuring that operators can choose what best fits their establishment's needs.

Safety is another priority within the VG series design. Each burner is equipped with a flame failure safety feature which automatically shuts off gas flow if the flame goes out. This enhances safety in high-pressure kitchen environments, providing peace of mind for operators and staff alike.

In summary, Vulcan-Hart VG48, VG160, VG36, VG24, and VG60 models are synonymous with performance, durability, and safety. They represent the best in commercial cooking technology, catering to a wide range of operational requirements while maintaining efficiency and reliability. For any foodservice operator seeking quality and dependability in their cooking equipment, the Vulcan-Hart VG series is an excellent choice.