DESK/TABLETOP Installation | Uniden EXS9600 guide

Color profile: Disabled

Composite Default screen

DESK/TABLETOP INSTALLATION

TIP

Before choosing a location for your phone, read the “Installation Considerations” included in the “Precautions and Important Safety Instructions” brochure.

INSTALLINGPHONE YOURADJUSTING

AND

1)Plug the AC adapter cord into the 9 VDC input jack on the back of the base.

2)Wrap the AC adapter cord around the strain relief notch.

	!	Place the power cord so that it does not create a trip
	!	hazard or where it could become chafed and create a fire
		hazard or where it could become chafed and create a fire

or electrical hazard.

3) Plug the AC adapter into a standard 120 VAC wall outlet.

!	Use only the Uniden AC adapter supplied with this phone
	and DO NOT use an outlet controlled by a wall switch.

4)Charge the battery (refer to “Charging the Battery Pack,” page 11).

5)Plug one end of the long telephone cord into the TEL LINE jack on the back of the base.

6)Plug the other end of the cord into your telephone jack on the wall.

3

I N S T A L L I N G A N D A D J U S T I N G

C:\LaDonna\Exs9600\EXS9600.vp Tue Dec 01 11:28:11 1998

Image 4

Uniden EXS9600 specifications DESK/TABLETOP Installation, Install I N G a N D a D J U S T I N G

Contents

Contents T R Spectrum technology Rechargeable Battery Short Telephone Cord Included in Your PackageHandset Base Long Telephone Cord Desktop/ Wall Mount DESK/TABLETOP Installation Install I N G a N D a D J U S T I N G Standard wall plate mounting Wall InstallationAttach the desktop stand to the base Phone is firmly seated \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112823 Direct wall mounting \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112832 Installing the Handset Battery Pack Slide the battery cover on until it snaps into place Charging the Battery Pack Initial battery chargingCharging optional battery packs Place the handset on the base Setting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Adjusting the Handset Volume Controls Handset ringer volumeHandset earpiece volume I N G a N D a D J U S T I N G To attach the beltclip Installing the BeltclipTo remove the beltclip Headset Installation To reset the digital security codeAutomatic Digital Code Security I N G Y O U R P H O N E Making and Receiving Calls Flash and Call Waiting Storing a Phone Number in Memory Remove the handset from the baseFollowing screen appears Press select. The following screen Editing a Phone Number in Memory Screen and any saved numbersYou have selected in the display With cursor next to Edit Memory Use the key to move the cursor to the Yes command Erasing a Number from MemoryO N E Press select. The following confirmation screen appears Using Memory Dialing Traveling OUT-OF-RANGE Using Caller ID Setting up Caller ID optionsTo change your Caller ID options Press setup. The following Screen appears Screening your calls Reviewing Caller ID messages Calling a Caller ID number Storing a Caller ID number into a memory location Deleting a Caller ID message Deleting all Caller ID messages Using Redial Using the Tone FeaturePress call id to return to standby Set to pulse Using the page Feature Quick Reference Chart O U Receive a Base Gener ALHandset Controls and Functions