Quick Reference Chart | Uniden EXS9600 specs

Color profile: Disabled Composite Default screen

TROUBLESHOOTING

YOUR NEW PHONE

QUICK REFERENCE CHART

If your phone is not performing to your expectations, please try these simple steps before calling Uniden customer service. If you are still unable to resolve the problem, contact your place of purchase or call customer service at (800) 297-1023.

PROBLEM		SUGGESTION

The charge light won’t come	•	Make sure the AC adapter is
on when the handset is placed		plugged into the base and
in the base.		wall outlet.
	•	Make sure the handset is properly
		seated in base.
	•	Make sure the charging contacts on
		the handset and base are clean.

The audio sounds weak	•	Make sure that the base antenna is
and/or scratchy.		in a vertical position.
	•	Move the handset and/or base to a
		different location away from metal
		objects or appliances and try again.

Can’t make or receive calls.	•	Check both ends of the base
		telephone line cord.
	•	Make sure the AC adapter is
		plugged into the base and
		wall outlet.
	•	Disconnect the AC adapter for a few
		minutes, then reconnect it.
	•	Place the handset back on the
		charging cradle for a few seconds.
		The status LED will blink
		indicating that the phone has
		been reset.

27

C:\LaDonna\Exs9600\EXS9600.vp Tue Dec 01 11:29:21 1998

Image 28

Uniden EXS9600 specifications Quick Reference Chart

Contents

Contents T R Spectrum technology Rechargeable Battery Short Telephone Cord Included in Your PackageHandset Base Long Telephone Cord Desktop/ Wall Mount DESK/TABLETOP Installation Install I N G a N D a D J U S T I N G Standard wall plate mounting Wall InstallationAttach the desktop stand to the base Phone is firmly seated \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112823 Direct wall mounting \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112832 Installing the Handset Battery Pack Slide the battery cover on until it snaps into place Charging the Battery Pack Initial battery chargingCharging optional battery packs Place the handset on the base Setting the PULSE/TONE Switch Cleaning the Battery ContactsLow battery indicator Adjusting the Handset Volume Controls Handset ringer volumeHandset earpiece volume I N G a N D a D J U S T I N G To attach the beltclip Installing the BeltclipTo remove the beltclip Headset Installation To reset the digital security codeAutomatic Digital Code Security I N G Y O U R P H O N E Making and Receiving Calls Flash and Call Waiting Storing a Phone Number in Memory Remove the handset from the baseFollowing screen appears Press select. The following screen Editing a Phone Number in Memory Screen and any saved numbersYou have selected in the display With cursor next to Edit Memory Use the key to move the cursor to the Yes command Erasing a Number from MemoryO N E Press select. The following confirmation screen appears Using Memory Dialing Traveling OUT-OF-RANGE Using Caller ID Setting up Caller ID optionsTo change your Caller ID options Press setup. The following Screen appears Screening your calls Reviewing Caller ID messages Calling a Caller ID number Storing a Caller ID number into a memory location Deleting a Caller ID message Deleting all Caller ID messages Using Redial Using the Tone FeaturePress call id to return to standby Set to pulse Using the page Feature Quick Reference Chart O U Receive a Base Gener ALHandset Controls and Functions