LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 | Uniden guide

Color profile: Disabled

Composite Default screen

3)Rotate the mounting adapter 180° and snap it into place at the bottom of the base.

4)Plug the AC adapter cord into the 9 VDC input jack on the back of the base.

5)Put the AC adapter cord inside the molded wiring channel, then wrap it

around the strain relief notch. Plug the AC adapter into a standard 120 VAC wall outlet.

6) Plug one end of the long telephone cord into the TEL LINE jack on the back of the base, then plug the other end into a standard telephone jack.

8

C:\LaDonna\Exs9600\EXS9600.vp

Tue Dec 01 11:28:30 1998

Image 9

$Uniden specifications LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830$

Contents

Contents Spectrum technology T R Included in Your Package Rechargeable Battery Short Telephone CordHandset Base Long Telephone Cord Desktop/ Wall Mount Install I N G a N D a D J U S T I N G DESK/TABLETOP Installation Wall Installation Standard wall plate mountingAttach the desktop stand to the base Phone is firmly seated \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112823 Direct wall mounting \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112832 Slide the battery cover on until it snaps into place Installing the Handset Battery Pack Initial battery charging Charging the Battery PackCharging optional battery packs Place the handset on the base Cleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator Handset ringer volume Adjusting the Handset Volume ControlsHandset earpiece volume I N G a N D a D J U S T I N G Installing the Beltclip To attach the beltclipTo remove the beltclip To reset the digital security code Headset InstallationAutomatic Digital Code Security I N G Y O U R P H O N E Flash and Call Waiting Making and Receiving Calls Remove the handset from the base Storing a Phone Number in MemoryFollowing screen appears Press select. The following screen Screen and any saved numbers Editing a Phone Number in MemoryYou have selected in the display With cursor next to Edit Memory Erasing a Number from Memory Use the key to move the cursor to the Yes commandO N E Press select. The following confirmation screen appears Traveling OUT-OF-RANGE Using Memory Dialing Setting up Caller ID options Using Caller IDTo change your Caller ID options Press setup. The following Screen appears Reviewing Caller ID messages Screening your calls Storing a Caller ID number into a memory location Calling a Caller ID number Deleting all Caller ID messages Deleting a Caller ID message Using the Tone Feature Using RedialPress call id to return to standby Set to pulse Using the page Feature Quick Reference Chart Receive a O U Gener AL BaseHandset Controls and Functions