Appendix A. Security and QoS Configuration Messages 49
%Error:Invalid rule This error message means that the hardware had a problem
programming the resource.
Re-enter the command that you had entered before
receiving the error message.
If the message recurs, find out more about the error by
using the show tech-support privileged EXEC command
and by copying the error message exactly as it appears on
the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar
reported problems. For more information about these online
tools , see the “Error Message Traceback Reports” section
on page 9.
%Error:Invalid ingress port This error message means that an invalid ingress port was
detected by the hardware .
Re-enter the command that you had entered before
receiving the error message.
If the message recurs, find out more about the error by
using the show tech-support privileged EXEC command
and by copying the error message exactly as it appears on
the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar
reported problems. For more information about these online
tools , see the “Error Message Traceback Reports” section
on page 9.
%Error:Another security mask on this
interface This error message means that there is another securit y
mask present on the interface.
Only one security mask is allowed on any interface.
Remove all the security access groups on this interface, and
attach the security access group that is required.
%Error:Another qos mask on this interface This error message means th at there is more than one
quality of service (QoS) mask on the interface.
Only one QoS mask is allowed on any interface.
Remove all the QoS policy maps on this interface, and
attach the policy map that is required.
%Error:No sec mask on this interface This error message means that no security mask has bee n
applied on this interface.
%Error:No qos mask on this interface This error message means that no QoS mask has been
applied on this interface.
%Error:No sec rules on this interface This error me ssage means that there are no security
resources on this interface.
%Error:No qos rules on this interface This error mes sage means that there are no QoS resources
on this interface.
Table 4. Common ACL Error Messages (Continued).
Error Message Explanation and Suggested Solution