Tyco Electronics P5400 8.6 ERROR MESSAGES

MM-012099-001, Rev. B

38

MESSAGE NAME DESCRIPTION

DENIED Call Denied Indicates the radio or talkgroup is not authorized to operate on the selected

system and/or talkgroup.

CC SCAN Control

Channel Scan Indicates the control channel is lost and the radio has entered the Control

Channel Scan mode to search for the control channel (usually out of range

indication).

WA SCAN Wide Area

Scan Indicates the radio has entered the Wide Area Scan mode to search for a

new system (if enabled through programming).

SYSC ON System Scan

Features On Indicates the System Scan features are enabled.

SYSC OFF System Scan

Features Off Indicates the System Scan features are disabled.

LOW BATT Low Battery Battery voltage has dropped to the point to where the radio is no longer able

to transmit. The radio will still receive calls until the battery is discharged

beyond the point of operation at which time the radio automatically shuts

down.

RXEMER Receive

Emergency Indicates an emergency call is being received. This message will be

flashing on line two.

TXEMER Transmit

Emergency Indicates an emergency call has been transmitted on this radio. This

message will be flashing on line two.

VOL=31 Volume Level Indicates the current volume level. The volume level display ranges from

OFF (muted) to 40 (loudest).

WHC Who Has

Called Indicates an individual call has been received, but not responded to. The

indicator turns OFF if the individual call mode is entered, the system is

changed, or the radio is turned off and then on again.

UNKNOWN Unknown ID Indicates an individual call is being received from an unknown ID.

8.6 ERROR MESSAGES

If either of the Error Messages shown below is displayed, the radio is programmed incorrectly or needs

servicing.

DSP ERR

ERR=XXXX

(PowerUp

only)

or DIG V x

ERR x

Where xxxx is the error code and DSP ERR or DIG V ERR is the message.

Contents

Main MM-012099-001, Rev. B 2 MANUAL REVISION HISTORY REV DATE REASON FOR REVISION ACKNOWLEDGEMENTS CREDITS! Page Page Page Page Page Page Page 1 SAFETY CONVENTIONS MM-012099-001, Rev. B 2 SAFETY TRAINING INFORMATION 2.1 RF EXPOSURE GUIDELINES MM-012099-001, Rev. B 2.2 ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY MM-012099-001, Rev. B 3 OPERATING TIPS 3.1 EFFICIENT RADIO OPERATION 3.1.1 Antenna Care and Replacement 3.1.2 Electronic Devices MM-012099-001, Rev. B 3.1.3 Aircraft 3.1.4 Electric Blasting Caps 3.1.5 Potentially Explosive Atmospheres MM-012099-001, Rev. B 4 BATTERIES 4.1 CONDITIONING BATTERY PACKS 4.1.1 Conditioning NiMH Battery Packs 4.1.2 Conditioning NiCD Battery Packs 4.2 CHARGING BATTERY PACKS 4.3 BATTERY PACK USAGE MM-012099-001, Rev. B 4.4 CHANGING THE BATTERY PACK 4.4.1 Removing the Battery Pack MM-012099-001, Rev. B 4.4.2 Attaching the Battery Pack 4.5 BATTERY DISPOSAL Page MM-012099-001, Rev. B 5 INTRODUCTION 5.1 WATER RESISTANCE 6 OPTIONS AND ACCESSORIES 22 DESCRIPTION PART NUMBER Page 7.1 CONTROLS MM-012099-001, Rev. B 7.1.2 Keypad Page MM-012099-001, Rev. B 7.1.3 Display MM-012099-001, Rev. B 28 7.1.3.1 Radio Status Icons MM-012099-001, Rev. B 7.2 UNIVERSAL DEVICE CONNECTOR Page Page MM-012099-001, Rev. B 8 EDACS OPERATION 8.1 CONTROLS 8.1.1 Buttons and Knobs MM-012099-001, Rev. B 8.1.2 Keypad 34 Figure 8-2: P5470 System Radio Front Panel Table 8-2: P5470 Keypad Functions KEY FUNCTION 8.2 DISPLAY 36 8.3 RADIO STATUS ICONS 8.4 TRI-COLOR LED 8.5 STATUS MESSAGES MM-012099-001, Rev. B 8.6 ERROR MESSAGES DSP ERR ERR=XXXX ERR x 8.7 ALERT TONES 8.8 TURNING ON THE RADIO 8.9 SYSTEM SELECTION MM-012099-001, Rev. B 8.10 GROUP/CHANNEL SELECTION 8.11 MODIFY SCAN LIST 8.11.1 P5470 Model MM-012099-001, Rev. B 8.11.2 P5450 Model 8.12 MENU 8.12.1 Menu Item Selection Process Page 43 Table 8-6: Information Display 8.13 BACKLIGHT ON/OFF 8.14 CONTRAST ADJUST 8.15 DECLARING AN EMERGENCY 8.16 LOCKING/UNLOCKING KEYPAD 8.17 HIGH/LOW POWER ADJUSTMENT 8.18 DIGITAL VOICE OPERATION 8.18.1 Clear Mode 8.18.2 Digital Mode MM-012099-001, Rev. B 8.18.3 Private Mode 8.18.3.1 Displaying the Currently Used Cryptographic Key Number 8.18.3.2 Key Zero MM-012099-001, Rev. B 8.18.4 Private Operation 8.18.4.1 Receiving an Encrypted Call 8.18.4.2 Transmitting an Encrypted Call 8.18.4.3 Scanned Group Calls MM-012099-001, Rev. B 8.19 SCANNING TRUNKED GROUPS 8.19.1 Turning Scan On and Off 8.19.2 Adding Groups to a Scan List Page 8.20 SCANNING TRUNKED SYSTEMS MM-012099-001, Rev. B 8.20.2 Priority System Scan 8.20.2.1 Enabling the Wide Area System Scan Function 8.20.2.2 When ProScan is Enabled 8.21 EMERGENCY OPERATION 8.21.1 Receiving an Emergency Call MM-012099-001, Rev. B 8.21.2 Declaring an Emergency Call 8.22 INDIVIDUAL CALLS 8.22.1 Receiving and Responding to an Individual Call MM-012099-001, Rev. B 8.22.2 Sending an Individual Call 8.22.2.1 Pre-Stored Individual Calls 8.23 TELEPHONE INTERCONNECT CALLS MM-012099-001, Rev. B 8.23.2 Sending a Telephone Interconnect Call 8.23.2.1 Pre-Stored Number 8.23.3 Dual-Tone Multi-Frequency: Overdial/Conventional Mode Page MM-012099-001, Rev. B 8.24 PROGRAMMABLE ENTRIES 8.24.1 Pre-Storing Individual and Telephone Interconnect Calls from the Keypad ENTRY 8.25 STATUS/MESSAGE OPERATION MM-012099-001, Rev. B 8.25.1 Status Operation NO ENTRY 8.25.2 Message Operation MM-012099-001, Rev. B 8.26 DYNAMIC REGROUP OPERATION ENTRY 8.26.1 Emergency Operation 8.27 MACRO KEY OPERATION 8.28 PORTABLE DATA MM-012099-001, Rev. B 8.28.1 Displays 8.28.2 DATA OFF Operation 8.28.3 DATA ON Operation 8.28.4 Exiting Data Cells MM-012099-001, Rev. B 8.28.6 Data Lockout Mode Page Page 9 CONVENTIONAL OPERATION 9.1 CONTROLS MM-012099-001, Rev. B 9.1.1 Buttons and Knobs MM-012099-001, Rev. B 9.1.2 Keypad Page 9.2 DISPLAY MM-012099-001, Rev. B 9.2.1 Radio Status Icons 9.3 TRI-COLOR LED 9.4 STATUS MESSAGES MM-012099-001, Rev. B 9.4.1 Error Messages DSP ERR ERR=XXXX 9.5 ALERT TONES 9.6 TURNING ON THE RADIO 9.7 SYSTEM SELECTION MM-012099-001, Rev. B 9.8 GROUP/CHANNEL SELECTION 9.9 MODIFY SCAN LIST 9.9.1 P5470 Model MM-012099-001, Rev. B 9.9.2 P5450 Model 9.10 NUISANCE DELETE 9.11 MENU Page 75 Table 9-3: Menu Item Information 9.12 BACKLIGHT ON/OFF 9.13 CONTRAST ADJUST 9.14 DECLARING AN EMERGENCY MM-012099-001, Rev. B 9.15 LOCKING/UNLOCKING KEYPAD 9.16 HIGH/LOW POWER ADJUSTMENT 9.17 DIGITAL VOICE OPERATION 9.17.1 Clear Mode MM-012099-001, Rev. B 9.18 RECEIVING A CALL 9.19 SENDING A CALL Page Page 10 P25 OPERATION 10.1 CONTROLS MM-012099-001, Rev. B 10.1.1 Buttons and Knobs MM-012099-001, Rev. B 10.1.2 Keypad 85 Figure 10-4: P5470 System Radio Front Panel Table 10-2: P5470 System Keypad Functions 10.2 DISPLAY 87 10.3 RADIO STATUS ICONS 10.4 TRI-COLOR LED 10.5 STATUS MESSAGES Page 10.6 ALERT TONES 10.7 TURNING ON THE RADIO 10.8 SYSTEM SELECTION MM-012099-001, Rev. B 10.8.1 GROUP/CHANNEL SELECTION 10.9 MODIFY SCAN LIST 10.9.1 P5470 Model MM-012099-001, Rev. B 10.9.2 P5450 Model 10.10 MENU 10.10.1 Menu Item Selection Process Page 94 Table 10-6: Information Display MM-012099-001, Rev. B 10.11 BACKLIGHT ON/OFF 10.12 CONTRAST ADJUST 10.13 DECLARING AN EMERGENCY 10.14 LOCKING/UNLOCKING KEYPAD 10.15 HIGH/LOW POWER ADJUSTMENT 10.16 DIGITAL VOICE OPERATION 10.16.1 Clear Mode 10.16.2 Digital Mode 10.16.3 Private Mode MM-012099-001, Rev. B 10.16.3.1 Displaying the Currently Used Cryptographic Key Number 10.16.3.2 Key Zero MM-012099-001, Rev. B 10.16.4 Private Operation 10.16.4.1 Receiving an Encrypted Call 10.16.4.2 Transmitting an Encrypted Call 10.16.4.3 Scanned Group Calls MM-012099-001, Rev. B 10.17 SCANNING TRUNKED GROUPS 10.17.1 Turning Scan On and Off 10.17.2 Adding Groups to a Scan List Page 10.18 SCANNING TRUNKED SYSTEMS MM-012099-001, Rev. B 10.18.2 Priority System Scan 10.18.2.1 Enabling the Wide Area System Scan Function 10.18.2.2 When ProScan is Enabled 10.19 EMERGENCY OPERATION 10.19.1 Receiving an Emergency Call MM-012099-001, Rev. B 10.19.2 Declaring an Emergency Call 10.20 INDIVIDUAL CALLS 10.20.1 Receiving and Responding to an Individual Call MM-012099-001, Rev. B 10.20.2 Sending an Individual Call 10.20.2.1 Pre-Stored Individual Calls 10.21 TELEPHONE INTERCONNECT CALLS MM-012099-001, Rev. B 10.21.2 Sending a Telephone Interconnect Call 10.21.2.1 Pre-Stored Number 10.21.3 Dual-Tone Multi-Frequency: Overdial/Conventional Mode Page MM-012099-001, Rev. B 10.22 PROGRAMMABLE ENTRIES 10.22.1 Pre-Storing Individual and Telephone Interconnect Calls from the Keypad ENTRY 10.23 STATUS/MESSAGE OPERATION MM-012099-001, Rev. B 10.23.1 Status Operation NO ENTRY 10.23.2 Message Operation MM-012099-001, Rev. B 10.24 MACRO KEY OPERATION 10.25 PORTABLE DATA 10.25.1 Displays 10.25.2 DATA OFF Operation 10.25.3 DATA ON Operation 10.26 GROUP CALLS IN P25 MODE 10.26.1 Transmitting a Group Call MM-012099-001, Rev. B 10.26.2 Receiving a Group Call 10.27 INDIVIDUAL CALLS IN P25 MODE 10.27.1 Transmitting an Individual Call 10.27.2 Receiving an Individual Call 10.28 EMERGENCY GROUP CALLS IN P25 MODE 10.28.1 Declaring an Emergency Group Call MM-012099-001, Rev. B 10.28.2 Receiving an Emergency Group Call Page Page 11 TECHNICAL ASSISTANCE 12 BASIC TROUBLESHOOTING BATTERY WARRANTY