Tyco Electronics P5400 manual KEY Function

MM-012099-001, Rev. B

Figure 8-2: P5470 “System” Radio Front Panel

Table 8-2: P5470 Keypad Functions

KEY		FUNCTION
	Primary Function: Accesses the pre-stored menu.
	Secondary Function: Activates a selected item within the menu. This is similar to an “Enter”
	key.
	Primary Function: Allows the user to scroll through available systems, groups, or channels,
	depending on personality programming.
	Secondary Function: Changes the selection for an item within a list.
	Primary Function: Refer to the separate key definitions within this table.
	Secondary Function: These keys function much as a typical DTMF telephone pad 0-9, *, and #
	keys; and are used to place telephone interconnect and individual (unit-to-unit) calls.
	Selects a specific system. If the rotary knob is used to select the system and more than 16
	systems are programmed	in the radio, the key is used to select additional banks
	(groupings) of systems.
	Selects a specific group.

Turns the Scan operation ON and OFF.

Enables or disables Private Mode for the system/group/channel displayed.

Adds groups or channels from the currently selected system to the Scan list.

Status. Access to the status list (0-9). The Status key permits the transmission of a pre- programmed status message to an EDACS site.

Message. Access to the message list (0-9). The Message key permits the transmission of a pre- programmed message to an EDACS site.

Deletes selected groups or channels of the currently selected system from the Scan list.

Initiates telephone interconnect calls.

Initiates individual unit-to-unit calls.

34