Tyco Electronics P5400 manual Sample Display Edacs Mode

MM-012099-001, Rev. B

KEY

(P5470 Only)

(P5470 Only)

(P5470 Only)

FUNCTION

Primary function: Enables or disables Private Mode for the system/group/channel displayed.

Primary function: Adds groups or channels from the currently selected system to the Scan list.

Primary function: Status key. Access to the status list (0-9). The Status key permits the transmission of a pre-programmed status message to an EDACS site.

Primary function: Message key. Access to the message list (0-9). The Message key permits the transmission of a pre-programmed message to an EDACS site.

Primary function: Deletes selected groups or channels of the currently selected system from the Scan list.

Secondary function: In EDACS mode the secondary function of these keys is much as a typical DTMF telephone pad 0-9, *, and # keys; and are used to place telephone interconnect and individual (unit-to-unit) calls. (See individual listings for primary functions.)

Primary function: In EDACS mode, initiates telephone interconnect calls.

Primary function: In EDACS mode, initiates individual, unit-to-unit calls.

7.1.3Display

The P5400 display is made up of 3 lines. Lines 1 and 2 contain twelve alpha-numeric character blocks each. The 3rd line also contains twelve blocks, each used to display radio status icons. If programmed, the display backlighting will illuminate upon power up or when radio controls are operated. Specific display characteristics will be discussed in following sub-sections.

Figure 7-6: Sample Display EDACS Mode

27