|
|
|
|
|
|
|
| |
| MESSAGE | NAME | DESCRIPTION |
| ||||
|
|
|
|
| Call Denied | Indicates the radio or talkgroup is not authorized to operate on the selected | ||
| DENIED |
|
|
| ||||
|
|
|
|
|
|
| system and/or talkgroup. |
|
|
|
|
| Control | Indicates the control channel is lost and the radio has entered the Control | |||
| CC SCAN |
|
| |||||
|
|
|
|
|
| Channel Scan | Channel Scan mode to search for the control channel (usually out of range | |
|
|
|
|
|
|
| indication). |
|
|
|
|
| Wide Area | Indicates the radio has entered the Wide Area Scan mode to search for a | |||
| WA SCAN |
|
| |||||
|
|
|
|
|
| Scan | new system (if enabled through programming). |
|
|
|
|
| System Scan | Indicates the System Scan features are enabled. |
| ||
| SYSC ON |
|
|
| ||||
|
|
|
|
|
| Features On |
|
|
|
|
| System Scan | Indicates the System Scan features are disabled. |
| |||
| SYSC OFF |
|
| |||||
|
|
|
|
|
| Features Off |
|
|
|
|
| Low Battery | Battery voltage has dropped to the point to where the radio is no longer able | ||||
| LOW BATT |
| ||||||
|
|
|
|
|
|
| to transmit. The radio will still receive calls until the battery is discharged | |
|
|
|
|
|
|
| beyond the point of operation at which time the radio automatically shuts | |
|
|
|
|
|
|
| down. |
|
|
|
| Receive | Indicates an emergency call is being received. This message will be | ||||
| RXEMER |
| ||||||
|
|
|
|
|
| Emergency | flashing on line two. |
|
|
|
| Transmit | Indicates an emergency call has been transmitted on this radio. | This | |||
| TXEMER |
| ||||||
|
|
|
|
|
| Emergency | message will be flashing on line two. |
|
|
|
| Volume Level | Indicates the current volume level. The volume level display ranges from | ||||
| VOL=31 |
| ||||||
|
|
|
|
|
|
| OFF (silent) to 40 (loudest). |
|
|
| Who Has | Indicates an individual call has been received, but not responded to. | The | ||||
| WHC |
| ||||||
|
|
|
|
|
| Called | indicator turns OFF if the individual call mode is entered, the system is | |
|
|
|
|
|
|
| changed, or the radio is turned off and then on again. |
|
|
| Unknown ID | Indicates an individual call is being received from an unknown ID. |
| ||||
| UNKNOWN |
|
| |||||
10.5.1Error Messages
If either of the Error Messages shown below is displayed, the radio is programmed incorrectly or needs servicing.
DSP ERR |
| or | DIG | V | x |
ERR=XXXX |
|
| ERR |
| x |
(PowerUp |
|
|
|
|
|
only) |
|
|
|
| |
Where: xxxx is the error code and DSP ERR or DIG V ERR is the message.
89
