MM-012099-001, Rev. B
4.Press 
once to add as a normal group or channel.
5.Press 
twice to add as a Priority 2 group.
6.Press 
three times to add as a Priority 1 group.
7.Press 
to
8.11.2P5450 Model
1.Press 
to toggle scan OFF and verify 
is not displayed.
2.Select group or channel.
3.Press 
once to remove group or channel from the list.
4.Press 
once to add as a normal group or channel.
5.Press 
twice to add as a Priority 2 group.
6.Press 
three times to add as a Priority 1 group.
7.Press 
to
8.12MENU
The Menu function accesses features that are not available directly from the keypad. The order and actual menu items available is configurable through programming. Upon radio power up, the menu item that is at the top of the menu list will always be displayed first. Subsequent access to the menu function will return the last menu item that was shown in the display and cursor position.
1.To enter the menu mode, then press 
.
2.Upon entering the menu selection mode, Menu options will appear in the display (see Figure
Figure 8-6: Menu Display
3.The radio will continue to receive and transmit normally while in the menu function.
4.To scroll through the menu options use the 
or 
keys. When the required menu item has been
found align the cursor with the option then press 
to select it. The menu item's parameter setting
shown in the display can now be changed by using 
or 
to scroll through the list of parameter values.
5.Once the desired setting is reached press 
to store the value and return the menu option selection level.
For menu items that display radio information, pressing 
or 
will scroll through a list of informational displays. Possible menu items are listed in Table
8.12.1Menu Item Selection Process
An example of the backlight menu item selection process and menu item parameter change is shown in Figure
41
