Tri-Color Led, Status Messages | Tyco Electronics P5400 specification

MM-012099-001, Rev. B

Figure 8-4: Full Cycle Battery Charge Indicator

The battery charge indicators illustrate approximate level only, based on battery voltage. Refer to Figure 8-4.

8.4TRI-COLOR LED

Figure 8-5: Tri-Color LED

The Tri-Color LED changes color to indicate radio status and is visible from both the front and top of the radio (see Figure 8-5). The colors of the LED and the status they represent while operating in EDACS and P25 modes are defined below.

Green:	Receiving
Red:	Unencrypted transmission
Orange:	Encrypted transmission

8.5STATUS MESSAGES

During radio operation, various radio Status Messages can be displayed. The messages are described below.

MESSAGE			NAME	DESCRIPTION
			Call Queued	Indicates the system has placed the call in a request queue.
QUEUED
			System Busy	Indicates the system is busy, no channels are currently available, the queue
SYS BUSY
				is full, or an individual call is being attempted to a radio that is currently
				transmitting.

37

Image 37

Tyco Electronics P5400 manual Tri-Color Led, Status Messages

Contents

P5400 Series MM-012099-001, Rev. B Table of Contents Menu 28.1 10.8.1 117 116 Tables Safety Section Safety Conventions RF Exposure Guidelines Safety Training Information Electromagnetic INTERFERENCE/COMPATIBILITY RF Exposure Compliance Testing Distances Operating Tips Antenna Care and ReplacementEfficient Radio Operation Electronic Devices Electric Blasting Caps AircraftPotentially Explosive Atmospheres Conditioning NiMH Battery Packs Conditioning Battery PacksConditioning NiCD Battery Packs Batteries Battery Pack Usage Charging Battery PacksAdditional Information Charging Guidelines Removing the Battery Pack Changing the Battery Pack Attaching the Battery Pack Battery Disposal Product Information Water Resistance Introduction Options and Accessories Options and Accessories Carrying Case Accessories P5400 Portable Radio User Interface Buttons and Knobs Controls Keypad P5400 Front Keypad Functions P5450 Scan Model Front Panel Display Sample Display Edacs Mode Status Icons Descriptions Radio Status Icons Tri-Color LED Universal Device Connector This page intentionally left blank Edacs Operation Edacs Operation Power ON-OFF Volume Knob P5450 Scan Radio Front Panel P5450 Keypad Functions KEY Function Display Radio Display in Edacs Mode Status Icon Descriptions Radio Status Icons Status Messages TRI-COLOR LED Error Messages Turning on the Radio Alert TonesSystem Selection Alert Tones Modify Scan List GROUP/CHANNEL Selection11.1 P5470 Model Menu Item Selection Process 11.2 P5450 Model Menu Item Information Backlight Menu Item Selection Parameter Information Display Feature Display Parameter Setting HIGH/LOW Power Adjustment Contrast AdjustBacklight ON/OFF Declaring AN Emergency Using the Pre-Programmed Option Button Using the Menu ButtonClear Mode Digital Mode System Encryption Key Display Private Mode Receiving an Encrypted Call Private Operation Turning Scan On and Off Scanning Trunked GroupsAdding Groups to a Scan List P5450 Model Radio P5470 Model Radio Deleting Groups from a Scan List Scanning Trunked SystemsNuisance Delete Wide Area System Scanning Priority System Scan Emergency OperationProScan Receiving an Emergency Call Declaring an Emergency Call Individual CallsReceiving and Responding to an Individual Call 11 Calls Received Lists Sending an Individual Call Call Storage Lists Telephone Interconnect CallsReceiving a Telephone Interconnect Call Sending a Telephone Interconnect Call Dual-Tone Multi-Frequency Overdial/Conventional Mode P5450 Model Radio STATUS/MESSAGE Operation Programmable EntriesMethod 2 P5470 model radios only Message Operation Status Operation Macro KEY Operation Dynamic Regroup OperationPortable Data Emergency Operation Displays Scan Lockout ModeData OFF Operation Data on Operation Data Lockout Mode This page intentionally left blank Conventional Operation Conventional Operation Power ON-OFF Volume Knob Voice Group Selection Control Knob P5450 Scan Radio Front Panel P5470 System Radio Front Panel Radio Display Radio Status Icons Battery Charge Icons Full Cycle Mode no repeater Name Tone Description Error Messages Method 1 P5470 Model 2 P5450 Model Nuisance Delete Backlight Menu Item Parameter Only. No user selectable settings LID in EDACS/EA. In Conv it has no Using the Pre-Programmed Option Button Using the Menu Button Receiving a Call Sending a Call This page intentionally left blank P25 Operation 10 P25 Operation Voice Group Selection Control Knob EMERGENCY/ Home Button Enter key P5470 System Radio Front Panel Display Display Descriptions TRI-COLOR LED Error Messages Call queued for processing 10.9.1 P5470 Model GROUP/CHANNEL Selection 10.9.2 P5450 Model Selectable settings Select Telephone Press Digital Voice Operation 11 System Encryption Key Display Group Clear Digital Private Programming Receive Transmit Scanning Trunked Groups 100 101 102 103 104 105 106 107 108 109 110 Exiting Data Calls Group Calls in P25 ModeTransmitting a Group Call Emergency Group Calls in P25 Mode Individual Calls in P25 Mode Receiving an Emergency Group Call 114 Technical Assistance Warranty Information Technical Assistance Troubleshooting Basic Troubleshooting Battery Warranty 119 Tyco Electronics Wireless Systems Segment