MM-012099-001, Rev. B

Figure 7-4: P5450 “Scan” Model Front Panel

Figure 7-5: P5470 “System” Model Front Panel

Alpha-numeric character entry is the secondary function of most of the P5400 keypad keys in the EDACS

mode of operation. In addition, the (*) and (#) keys are also available. The primary and secondary functions of each key, where applicable, are described in Table 7-1and the following section.

 

Table 7-1: P5400 Front Keypad Functions

KEY

FUNCTION

 

Primary Function: Accesses the pre-stored menu.

 

Secondary Function: Activates a selected item within the menu. This is similar

 

to an “Enter” key.

 

Primary Function: Allows the user to scroll through available systems, groups,

 

or channels, depending on personality programming.

 

Secondary Function: Changes the selection for an item within a list.

 

In EDACS and Conventional Analog modes, Adds/Deletes selected groups or

(P5450 only)

channels from SCAN list of the currently selected system.

 

In EDACS and Conventional Analog modes, toggles SCAN operation ON and

(P5450 only)

OFF.

 

In EDACS and Conventional Analog modes, activates one of any

(P5450 only)

programmable software options selected during the PC programming,

including: high/low TX power and talkaround.

 

 

Primary function: Selects a specific system. If the rotary knob is used to select

 

the system and more than 16 systems are programmed in the radio, the key

 

is used to select additional banks (groupings) of systems.

 

Primary function: Selects a specific group.

 

 

 

Primary function: Turns the Scan operation ON and OFF.

 

 

26

Page 26
Image 26
Tyco Electronics manual P5450 Scan Model Front Panel, P5400 Front Keypad Functions