Table 4. Common ACL Error Messages (Continued).
Error Message | Explanation and Suggested Solution |
|
|
%Error:Policer Configuration Incorrect for | This error message means that the granularity of the policer |
this interface. Check the policer rate in | rate in the policy map is 1 Mbps. |
| |
Change the policer rate to either of the suggested values. | |
[lower |
|
rate] or [upper rate] (bits per second) as |
|
the |
|
policer rate |
|
|
|
%Error:The name '[aclname]' has been used | This error message means that the name on the MAC |
for | extended ACL might have been used in another named ACL |
ACL of another type | that is not a MAC extended ACL. |
|
|
52Cisco Systems Intelligent Gigabit Ethernet Switch Module for the IBM Eserver BladeCenter System Message Guide
