Manuals / Uniden / Communications / Cordless Telephone

Uniden EXS9600 Installing the Beltclip, To attach the beltclip, To remove the beltclip

Models: EXS9600

1 31

Download 31 pages 14.53 Kb

Page 15

Color profile: Disabled

Composite Default screen

INSTALLING THE BELTCLIP

▼ To attach the beltclip

1)Remove the slot cover.

IMPORTANT

Use only the Uniden HS910 headset specifically designed for Spread Spectrum phones. You will hear a buzz or hum on other headsets.

2)Insert the beltclip into the empty slot and press down until it clicks.

IMPORTANT

Keep headset wire away from base antenna.

NOTE

If you are using an optional headset, you must still use the handset keypad for phone operations.

▼ To remove the beltclip

1)Pull back on the release tab and pull the beltclip up.

2)Replace the slot cover. You can store either the beltclip

or slot cover on the

bottom of the base.

14

C:\LaDonna\Exs9600\EXS9600.vp

Tue Dec 01 11:28:49 1998

Image 15

Uniden EXS9600 specifications Installing the Beltclip, To attach the beltclip, To remove the beltclip

Contents

Contents Spectrum technology T RLong Telephone Cord Desktop/ Wall Mount Rechargeable Battery Short Telephone CordIncluded in Your Package Handset BaseInstall I N G a N D a D J U S T I N G DESK/TABLETOP InstallationWall Installation Standard wall plate mountingAttach the desktop stand to the base Phone is firmly seated \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112823 Direct wall mounting \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112832 Slide the battery cover on until it snaps into place Installing the Handset Battery PackPlace the handset on the base Charging the Battery PackInitial battery charging Charging optional battery packsCleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator I N G a N D a D J U S T I N G Adjusting the Handset Volume ControlsHandset ringer volume Handset earpiece volumeInstalling the Beltclip To attach the beltclipTo remove the beltclip I N G Y O U R P H O N E Headset InstallationTo reset the digital security code Automatic Digital Code SecurityFlash and Call Waiting Making and Receiving CallsPress select. The following screen Storing a Phone Number in MemoryRemove the handset from the base Following screen appearsWith cursor next to Edit Memory Editing a Phone Number in MemoryScreen and any saved numbers You have selected in the displayPress select. The following confirmation screen appears Use the key to move the cursor to the Yes commandErasing a Number from Memory O N ETraveling OUT-OF-RANGE Using Memory DialingScreen appears Using Caller IDSetting up Caller ID options To change your Caller ID options Press setup. The followingReviewing Caller ID messages Screening your callsStoring a Caller ID number into a memory location Calling a Caller ID numberDeleting all Caller ID messages Deleting a Caller ID messageSet to pulse Using RedialUsing the Tone Feature Press call id to return to standbyUsing the page Feature Quick Reference Chart Receive a O UGener AL BaseHandset Controls and Functions