Charging the Battery Pack | Uniden EXS9600 specification

Color profile: Disabled Composite Default screen

NOTE

Please visit your authorized Uniden dealer to obtain an extra battery pack or contact the Uniden parts department at (800)554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday.

CHARGING THE BATTERY PACK

▼Initial battery charging

Before plugging the phone line into your new phone for the first time, fully charge the battery pack for 15-20 hours without interruption.

1)Place the handset on the base.

2)Make sure that status LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

▼Charging optional battery packs

The base unit of your phone is equipped with a compartment for charging an extra battery pack for use in your handset. You can obtain an extra battery pack from your authorized Uniden dealer.

1)Position the battery pack so the inner side with contacts is facing up.

2)Slide the battery pack into the charging compartment until it clicks into place.

3)Charge the battery for 24 hours. When charging is complete, pull up on the latch to remove the battery pack. To install the charged battery into the handset, refer to "Installing the Handset Battery Pack," page 10.

	!	In the event of a power failure, your spare battery pack
	!	can be used as a back-up power supply for the base unit.
		can be used as a back-up power supply for the base unit.

11

I N S T A L L I N G A N D A D J U S T I N G

C:\LaDonna\Exs9600\EXS9600.vp Tue Dec 01 11:28:38 1998

Image 12

Uniden EXS9600 specifications Charging the Battery Pack, Initial battery charging, Charging optional battery packs

Contents

Contents T R Spectrum technology Rechargeable Battery Short Telephone Cord Included in Your PackageHandset Base Long Telephone Cord Desktop/ Wall Mount DESK/TABLETOP Installation Install I N G a N D a D J U S T I N G Wall Installation Standard wall plate mountingAttach the desktop stand to the base Phone is firmly seated \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112823 Direct wall mounting \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112830 \LaDonna\Exs9600\EXS9600.vp Tue Dec 01 112832 Installing the Handset Battery Pack Slide the battery cover on until it snaps into place Charging the Battery Pack Initial battery chargingCharging optional battery packs Place the handset on the base Cleaning the Battery Contacts Setting the PULSE/TONE SwitchLow battery indicator Adjusting the Handset Volume Controls Handset ringer volumeHandset earpiece volume I N G a N D a D J U S T I N G Installing the Beltclip To attach the beltclipTo remove the beltclip Headset Installation To reset the digital security codeAutomatic Digital Code Security I N G Y O U R P H O N E Making and Receiving Calls Flash and Call Waiting Storing a Phone Number in Memory Remove the handset from the baseFollowing screen appears Press select. The following screen Editing a Phone Number in Memory Screen and any saved numbersYou have selected in the display With cursor next to Edit Memory Use the key to move the cursor to the Yes command Erasing a Number from MemoryO N E Press select. The following confirmation screen appears Using Memory Dialing Traveling OUT-OF-RANGE Using Caller ID Setting up Caller ID optionsTo change your Caller ID options Press setup. The following Screen appears Screening your calls Reviewing Caller ID messages Calling a Caller ID number Storing a Caller ID number into a memory location Deleting a Caller ID message Deleting all Caller ID messages Using Redial Using the Tone FeaturePress call id to return to standby Set to pulse Using the page Feature Quick Reference Chart O U Receive a Gener AL BaseHandset Controls and Functions