3.If pilot fails to light, turn main gas supply OFF. Wait 5 minutes and repeat the above procedures.
4.Turn one open top burner valve ON to remove air from the gas line. Turn burner OFF when gas begins to flow.
Nightly Shutdown: Turn burner valve OFF; pilot will remain lit.
Complete Shutdown
1.Turn burner valve OFF; pilot will remain lit.
2.Turn main gas supply OFF.
Broiler/Griddle
1. Turn main gas supply ON.
2 Wait 30 seconds and, using a taper, light broiler/griddle pilot (see Fig. 13).
3.If pilot fails to light, turn main gas supply OFF. Wait 5 minutes and repeat Steps 1 and 2.
4.Turn burner valve ON to purge air from the lines. Turn burner valve OFF when gas begins to flow.
Nightly Shutdown: Turn burner valve OFF; pilot will remain lit.
Complete Shutdown
1.Turn burner valve OFF; pilot will remain lit.
2.Turn main gas supply OFF.
Standard Oven
Light open top/griddle pilots before lighting oven pilot.
1. Open kick panel and lift up the pilot lighting hole cover (Fig. 15).
Fig. 15 | Fig. 16 |
2.Light pilot by depressing the reset button located behind the kick panel (Fig. 16). Continue to hold reset button in for 1 minute. If pilot fails to light, turn main gas supply OFF and wait 5 minutes before repeating Step 2.
— 19 —
