TacT Audio RCS 2.2 XP owner manual ADC menuuse to set the analog input sensitivity

Front Panel > Main Menu

MAIN menu The main menu screen lists all of the RCS 2.2 XP general menus. Access the main menu through the menu button on the front panel or the remote control.

CAUTION

To highlight a menu option use the navigational buttons. To enter a highlighted option press the “ ENTER” button.

MODE menu sets operation mode for the 2.2XP - use to specify 2.2, 2.1, 2.0 modes or the MONO option.

ADC menuuse to set the analog input sensitivity.

DOUT-FS menu use to set the Left/Right and Sub Left/Right digital output sampling frequency.

POL menuuse to set the channel polarity as well as the absolute polarity.

TEST menuallows for the pink noise output test.

DISPLAY menu use to set various display options.

COMM menuuse to set the 2.2 XP device address.

AMP menu use to enables/disables Tact digital amplifier control.

OPTIONS menu use to set various 2.2 XP options.

LOCK menuallows for locking certain parts of the user interface

MSR screendisplays microphone calibration information.

INFO screen displays firmware version.

Note: The MSR screen is now accessed through the First Screen DRC-RCScor- recion screen option.

30Tact Audio