2.0 Mode
This operating mode assumes a stereo system consisting of two main channels only. To select 2.0 mode from the main screen, click on the MENU button to enter main menu screen and then select the MODE menu. In the MODE menu click on STEREO 2.0 option. This will select 2.0 mode and display it on top of the screen
(1).
CAUTION
Fig. 8. Mode menu. 2.0 mode selection is displayed in the upper left corner (1).
The rest of the procedure is the same as in 2.2 mode. Note the change in the measurement screen in Fig. 9. The
Fig. 9. Measurement screen for 2.0 mode. Note that SR does not have a rectangle around indicating that this channel is not set for measurement.
In 2.0 mode only the Left and Right channels will be measured. At the end of the measurement process the Subwoofer Left and Subwoofer Right measurement data will be set to 0 dB fl at response.
