TacT Audio RCS 2.2 XP owner manual 42Tact Audio

Front Panel > Correction Menu

LEVELS menu Use th is menu to set individual channel level settings.

CAUTION

Use the UP and DOWN buttons to place screen cursor on desired option and then use the LEFT and RIGHT buttons to adjust individual channel level set- tings.

Each output signal level is determined by the channel level, as set in this menu, the master level control, and system GAIN as set in OPTIONS menu.

DELAYS menu Use th is menu to set individual channel delay settings.

Use the UP and DOWN buttons to place screen cursor on desired option and then use the LEFT and RIGHT buttons to adjust individual channel level set- tings.

Place screen cursor over field (1) and press ENTER to switch between AUTO and MANUAL delay time setup. When AUTO is selected the delay time is deter- mined by the measurement algorithm during the measurement process. Mea- sured delay time is saved with each measurement in the selected measurement file. These values can be manually changed but once the correction preset is re-selected, changes made to the delay time will be lost.

To use manually set delay times set the field (1). Tact-2.2 XP keeps track of de- lay times set for both AUTO and MANUAL delay option.

42Tact Audio