TacT Audio RCS 2.2 XP owner manual NAMES menu, CRO menu

Front Panel > Correction Menu

NAMES menu Use this screen to view the symbolic names assigned to each preset number.

Use the UP and DOWN buttons to place the screen cursor on desired option.

Press the enter button to engage the selected correction preset.

CRO menu Use this screen to set RCS 2.2 XP crossover parameters.

To highlight a menu option use the navigational buttons. To select a highlighted option press the “ ENTER” button.

1.Use this option to set low-pass fi lter order. This option can be set from 1 to 24.

2.Use this option to set the low-pass filter cutoff frequency. Minimum fre- quency is 40 Hz and maximum frequency is 500 Hz.

3.Use this option to set the high-pass filter order. This option can be set from 1 to 12

4.Use this option to set the high-pass filter cutoff frequency. Minimum fre- quency is 40 Hz and maximum frequency is 500 Hz.

5.Place the cursor on this option and press the ENTER button to turn the crossover filters ON or OFF.

6.Click on this option to engage selected crossover filters.

7.Displays the currect correction preset.

Tact Audio 43