Front Panel > Main Menu
COMM menu Use this screen to set the 2.2 XP device address.
CAUTION
This menu has only one option, Address Address can be set to a ny number between 1 and 255. This parameter is used by PC programs to identify the
2.2XP. This feature allows for multiple Tact units to be controlled by the same RS232 link. The RS232 speed is set to 57.6 Kb.
To change the system device address highlight the “Address” option and then using the “LEFT” and “RIGHT” navigational buttons select the desired system address. The RCS 2.2X is shipped with the default address set at 1.
NOTE: If you change the device address make sure that you select the ap- propriate device address in the RCS 2.2X Room Correction software.
