TacT Audio RCS 2.2 XP owner manual Max Level

Front Panel > Main Menu

OPTIONS menu The options menu allows for control of the systems maximum signal level, signal detection threshold (SDTH), wheel speed, and remote control.

CAUTION

To select an option highlight it using the “UP” and “DOWN ” navigational buttons.

To modify a selected option use the “LEFT” and “ RIGHT” buttons.

Max Level	This option controls the system’s maximum signal level.
	For example, if this option is set to -3.0 dB, the volume
	control can not go above -3.0 dB. The minimum value is
	-99.9 and the maximum value is equal to the value of the
	GAIN parameter.
Detection	This option sets the signal detection threshold. If the
	absolute value of the Left or the Right channel signal
	goes above this threshold the red signaling dot will be
	displayed on the front panel bellow the master volume
	display. This feature can be used to indicate signal pres-
	ence on either channel or to indicate near clip condition.
	To use it as a signal presence indicator set the Detection
	to a value close to -90.0 dB. To use it as near clip indica-
	tor set the Detection to a value close to 0.0 dB. This pa-
	ramete can be set anywhere from -99.9 dB to 0 dB. One
	step above 0 dB will turn this feature OFF.
	NOTE: This light does not indicate clip condition.
	When the para meter is set to bellow 0 dB and the red LED on the
	frontpanelturnson,itisonlyanindicationthattheinputaudiosignal
	hasreachedthethresholdlevel.Itdoesnotindicatedinputoroutput
	signal clipping.
Wheel	This option sets the wheel sensitivity. The wheel sensitiv-
	ity can be set to between 1 and 10 or to “OFF” to disable
	the Wheel for volume control. The lower the setting the
	slower the volume increases and the higher the setting
	the faster the volume increases with each turn of the
	Wheel.
Remote	This option enables and disables the remote control.
	Once the remote control is disabled the unit can only be
	controlled from the front pane l.
GAIN

38Tact Audio