TacT Audio RCS 2.2 XP owner manual Tact Audio

Front Panel > Correction Menu

In most cases, factory presets are optimum and users can proceed directly with peforming actual measurements. To initiate the room measurement process, click on the START button. The microhpone calibration and measurement screen will be displayed:

After the measurements are completed, click on the EXIT option and then click on the MENU button to go back to the DRC-RCSscreen (Fig. 3). At any time dur- ing the measurement process you can click on the CANCEL option to cancel the process. After the measurement is completed or the measurement was canceled, the CANCEL option changes its name to EXIT.

NOTE: For instructions on how to initiate Automatic Room Correction, please go to p.12.

Tact Audio 45