HUAWEI MC509 CDMA LGA Module

 

AT Command Interface Specification

Network Service Interface Commands

The test command queries the current RSSI and BER values.

6.7.3Parameter Description

<rssi>: Indicates the received signal strength. The values are as follows:

0:The strength is equal to or less than –113 dBm.

1:The strength is equal to –111 dBm.

2...30: The strength is between –109 and –53 dBm.

31:The strength is equal to or greater than –51 dBm.

99:The strength is unknown or cannot be measured.

<ber>: A percentage value. BER query is not supported at present. "99" is returned when the execution command and the test command are executed.

6.8 ^RSSILVLCommand for Reporting the RSSI

6.8.1 Syntax

Command

Possible Response(s)

 

 

 

<CR><LF>^RSSILVL:<rssi><CR><LF>

 

 

6.8.2Interface Description

When the RSSI change exceeds a threshold, the MT automatically reports the RSSI to the TE.

6.8.3Parameter Description

<rssi>: Indicates the received signal strength. The values are as follows:

0:no signal

20:one bar

40:two bars

60:three bars

80:four bars

99:five bars

Issue 01 (2011-08-26)

Huawei Proprietary and Confidential

64

Copyright © Huawei Technologies Co., Ltd.

 

 

Page 64
Image 64
Huawei MC509 manual RSSILVL-Command for Reporting the Rssi, Test command queries the current Rssi and BER values