Huawei MC509 Bodysarcdma -Set the max tx Power Limit, Bodysarcdma=, Crlferrorcrlf BODYSARCDMA?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	SAR Commands

13.2^BODYSARCDMA –Set the max tx Power Limit of

CDMA

13.2.1 Syntax

Command	Possible Response(s)
^BODYSARCDMA=<	In case of successful execution:
power>	<CR><LF>OK<CR><LF>
	In case of an error during command execution:
	<CR><LF>ERROR<CR><LF>
^BODYSARCDMA?	I In case of successful execution:
	<CR><LF>^BODYSARCDMA:<power><CR><LF>
	<CR><LF>OK<CR><LF>
	In case of an error during command execution:
	<CR><LF>ERROR<CR><LF>
^BODYSARCDMA=?	<CR><LF>^BODYSARCDMA:(19,24)<CR><LF>
	<CR><LF>OK<CR><LF>

13.2.2Interface Description

This command is used to set the max transmit power limit of CDMA. Read command can queries current value of the max transmit power limit, Test command returns supported value of the max transmit power limit.

13.2.3Parameter Description

<power>: the max transmit power limit of CDMA Integer from 19 to 24; default value is 24

13.3^THERM–Thermal Protection Activated Usolicited Report

13.3.1 Syntax

Command	Possible Response(s)
	<CR><LF>^THERM:<Status><CR><LF>

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	132
	Copyright © Huawei Technologies Co., Ltd.