Huawei MC509 manual 17 +CMGF- Command for Set Message Format, +CMGF=mode

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	SMS Interface Commands

0:The short messages specified by <index> are deleted. The execution result corresponds to the execution result without the parameter.

1:All read short messages on the preferred storage medium are deleted; unread, sent, and unsent short messages are retained.

2:All read and sent short messages on the preferred storage medium are deleted; unread and unsent short messages are retained.

3:All read, sent, and unsent short messages on the preferred storage medium are deleted; unread short messages are retained.

4:All short messages (including unread short messages) on the preferred storage medium are deleted.

8.16^SMMEMFULL–Command for Reporting Full of Short Messages on a Storage Medium

8.16.1 Syntax

Command	Possible Response(s)
	<CR><LF>^SMMEMFULL:<mem_type><CR><LF>

8.16.2Interface Description

If the limit for the short messages stored on the specified storage medium has been reached, this event is automatically reported to the TE by using the ^SMMEMFULL command when a new message arrives. The user can use the +CPMS command to switch to another storage medium for storing the message.

8.16.3Parameter Description

<mem_type>: A string, specifying the type of the storage medium where short messages are full.

"SM": R-UIM card

"ME": nonvolatile memory on the module

8.17 +CMGF– Command for Set Message Format

8.17.1 Syntax

Command	Possible Response(s)
+CMGF[=<mode>]	<CR><LF>OK<CR><LF>

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	106
	Copyright © Huawei Technologies Co., Ltd.