Huawei MC509 manual MODE-Command for Indicating the System Mode Change, Crlferrorcrlf PREFMODE?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Network Service Interface Commands

6.4^MODE–Command for Indicating the System Mode Change

6.4.1 Syntax

Command	Possible Response(s)
	<CR><LF>^MODE:<sys_mode>[,<sys_submode>]
	<CR><LF>

6.4.2Interface Description

When the system mode changes, the MT automatically reports the change to the TE.

6.4.3Parameter Description

<sys_mode>: Indicates the system mode. The values are as follows:

0:no service

2:CDMA mode 4:HDR mode 6:GPS mode

8:CDMA/HDR HYBRID

<sys_submode>: Indicates the system sub-mode. This parameter is not used in the product.

6.5^PREFMODE–Command for setting the network mode

6.5.1 Syntax

Command	Possible Response(s)
^PREFMODE=<pref_mode	<CR><LF>OK<CR><LF>
>	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF>
^PREFMODE?	<CR><LF>^PREFMODE:<pref_mode><CR><LF>
	<CR><LF>OK<CR><LF>
^PREFMODE=?	<CR><LF>^ PREFMODE: (range of supported <
	pref_mode >s)<CR><LF>OK<CR><LF>

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	61
	Copyright © Huawei Technologies Co., Ltd.