Huawei MC509 manual 11 +CFUN-Command for Setting the Operating Mode, +Cfun?, +Cfun=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Basic Configuration Commands

<err>: For its value, see section 15.1 "CME ERROR List."

2.11 +CFUN–Command for Setting the Operating Mode

2.11.1 Syntax

Command	Possible Response(s)
+CFUN[=<fun>[,<rst>]]	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
+CFUN?	<CR><LF>+CFUN:<fun><CR><LF>
	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
+CFUN=?	<CR><LF>+CFUN:(supported <fun> list),(supported
	<rst> list)<CR><LF>
	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>

2.11.2Interface Description

The execution command sets the operating mode of the MT.

The current operating mode is returned when the read command is executed.

The supported parameter value is returned when the test command is executed.

2.11.3Parameter Description

<fun>:

0:The operating mode is set to the low power consumption (LPM) mode (the previous operating mode of the MT must be the non-offline mode).

1:The operating mode is set to the online mode (the previous operating mode of the MT must be the non-offline mode) (default value after startup).

4:The operating mode is set to the offline mode (the previous operating mode of the MT must be the non-FTM mode)

5:The operating mode is set to the FTM mode (the previous operating mode of the MT must be the online mode)

6:reset the MT (the previous operating mode of the MT must be the offline mode)

<rst>: Specifies whether the MT is restarted before the mode is set (reserved and not supported at present).

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	33
	Copyright © Huawei Technologies Co., Ltd.