Huawei MC509 manual Command for Setting the Response Format, String FormatV1 Digit Format Meaning

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Basic Configuration Commands

2.5 V–Command for Setting the Response Format

2.5.1 Syntax

Command	Possible Response(s)
V[<value>]	<CR><LF>OK<CR><LF>

2.5.2Interface Description

This command sets the format of the result code and information field in response to an AT command, including the composition of the header and the tail and the form of the returned result code content. The retuned result code content has two formats, namely, digit, and detailed string.

The following table describes the impact of the format setting on the format of the result code and the response information field. <CR> indicates the S3 character and <LF> indicates the S4 character.

		V0			V1
	Response	<text><CR><LF>			<CR><LF>
	information				<text><CR><LF>
	field
	Result code	<numeric code><CR>			<CR><LF>
					<verbose code><CR><LF>
The following table describes the format comparison of the returned result code
content.
	String Format(V1)		Digit Format (V0)	Meaning
	OK		0	The command is successfully executed.
	CONNECT		1	The connection is successfully
				established.
	RING		2	The MT rings.
	NO CARRIER		3	The connection fails to be established or
				the MT hangs up.
	ERROR		4	The command is unavailable or the line
				of commands is too long; therefore, an
				error is returned.
	NO DIALTONE		6	There is no dialing tone.
	BUSY		7	The called subscriber is busy.
	NO ANSWER		8	There is no answer.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	28
	Copyright © Huawei Technologies Co., Ltd.