TacT Audio RCS 2.2 XP owner manual POL menu

Front Panel > Main Menu

POL menu Use this screen to set individual channel polarity and absolute channel polarity

CAUTION

Each channel can be set to “+” (0) or “ ” (inverted).

To select an option use the “UP” and “DOWTtttnavigational buttons and to change its value press the “ ENTER” button to toggle between a “+” or “ ” setting.

If all channel options are set to ‘+’ or all channel options are set to ‘-’, all output signals will come out in phase. If one channel is set to ‘+’ and another channel is set to ‘-’ their respective output signals will be out of phase.

ABS POL option (absolute polarity) will flip the phase on all channels.

TEST menu The test menu is designed to allow for a quick system check. When engaged it will produce pink noise on all selected channels. When a channel is set to “Y” pink noise will be heard from that channel when “ Run Test” is selected.

To highlight an option use the the “UP” and “DOWN ” navigational buttons and then press the “ ENTER” button to make your selection. After all selections are made, highlight the “ Run Test” option and hold down the “ENTER” button to produce the test signal. The test tone will stop when the “ENTER” button is re- leased. Press the “MENU ” button to exit this menu.

34Tact Audio