INSTALLING THE CHIMNEY HOOD
RECIRCULATION
If you are using the hood for recirculation, ensure the charcoal filters are in position following the instructions contained in the section “To Remove/Replace the Charcoal Filters”.
Note: When the hood is used in the recirculation mode ensure that the plate
(T)has been fixed into the lower chimney section. If not, fit the plate as illustrated opposite using two of the self tapping
screws provided in the fixing kit.
FITTING THE CHIMNEY
STACK
The chimney stack consists of two sections.
1.Fit the upper section (S) first. Expand the chimney slightly to allow it to be fitted over the brackets (1) and (2), and then secure the chimney stack to bracket (2) using two self tapping screws provided in the fitting kit.
2.Fit the lower chimney section (I) by expanding the chimney slightly to allow it to be fitted over the brackets (1), and the upper chimney section and bracket (3).
3.Ensure the bottom edge of the chimney stack is fitted correctly into the recess around the top of the canopy, and secured using the two self tapping screws as illustrated in the
Note:The upper (S) and lower (I) chimney stack sections are fixed to the middle wall bracket (3) by the natural force of the metal, and the over lapping of the sections by vigorously pushing against the centre of the chimney.
13
