Toshiba A10 manual System Board Troubleshooting Troubleshooting Procedures

2.4 System Board Troubleshooting 2 Troubleshooting Procedures

NOTE: The printer port LED outputs the status of an item in which an error is occurred. If the printer port LED outputs “0Ch” and then halts, it indicates memory check of first 64KB is completed and an error occurred during initialization of vector.

Check 1 If the following error codes are displayed, go to Procedure 5.

B0h, B1h, B2h, B5h, B6h, B3h, 00h, 01h, 02h, 03h, 04h, 05h, 06h, 07h, 08h, 09h, 0Bh, 0Ch, 0Dh, 0Eh, 0Fh, 10h, 11h, 12h, 13, 14h, 15h, 16h, 17h, 18h, 19h, 1Ah, 1Bh, 1Ch, 1Eh

Check 2 If error code 0Ah is displayed, go to the following Sections:

Section 2.5 3.5” FDD Troubleshooting

Section 2.6 2.5” HDD Troubleshooting

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 2-29