Printer port LED suspend mode error status 3/3

Table 2-4 Printer port LED suspend mode error status (3/3)

LED Status	Test item	Contents

36h	Prohibition of PCI arbiter

	Setting of Wakeup event

	Power-off of PC card

	Re-setting backup current

	Forced off of fan

	Checks whether off-process for resume is
	needed
	Power LED control during suspending

	Isolates built-in LAN.

	Makes the power of sound off.

	Makes the power of Dock off.	(Models supporting Dock)

37h	Model-unique processing just before	Setting the corresponding-time of power
37h	suspending	switch to 50ms
	suspending	switch to 50ms
		Setting the corresponding-time of panel
		opening to 50ms
		Setting Speed Step to Low

	Waiting for completion of dividing for
	suspending
	Stops dividing of extension command for
	power off.
38h	Measure for USB over current

	Serial interrupt control

	Calculation of check sum of PnP RAM area	(Not work in suspending for boot)

	Acquires how to turn the power off.

	Resets by EC.	(when required)

	Makes not to send Eject Power Off
	command when turn the power off by the
	date check of alarm power on.
	Prohibition of all SMI

	Initializing of special register in suspending

	Calculates the check sum of SMRAM and
	stores it in SMRAM.
39h	Calculates the checksum of system BIOS in	(Checksum does not match during IRT)
39h	the IRT side.	(Checksum does not match during IRT)
	the IRT side.
	Setting status of suspend completion

	Prohibition of L1&L2	Power off (completion of BIOS))

2-33