4 Replacement Procedures

4.3 Memory Module

4.3Memory Module

CAUTION: The power of the computer must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself.

Do not touch the memory module terminals. Any dirt on the terminals may cause memory access problems.

Never press hard or bend the memory module.

Removing the memory module

To remove a memory module, confirm that the computer is in boot mode. Then perform the following procedure (See Figure 4-4, 4-5).

1.Turn the computer upside down.

2.Remove the screw fixing the memory slot cover. (This screw is fixed to the memory slot cover and can not be removed.)

3.Remove the memory slot cover from the screw side.

THIN BIND M2.54B

Figure 4-4 Removing Memory Slot Cover

4-12

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)

Page 218
Image 218
Toshiba A10 manual Replacement Procedures Memory Module, Removing the memory module