Printer port LED resume mode error status 2/4

Table 2-5 Printer port LED resume mode error status (2/4)

LED Status	Test item	Contents

		Control of permission/prohibition for built-in LAN

	Check of the checksum of conventional	Resume error 74H
	memory	Resume error 74H
	memory
21h	Initializing of PCI devices

	Check of WakeUp factors after initializing
	PCI bus
22h	Waiting for initializing of devices	Waiting for completion of MultiBox status
	which have to be initialized before	check
	setting HW by PnP resource
	Recovery of each device (1)	Processing of RESUME for PnP

		Tentative initialization of printer port

		Serial interrupt control

		Waiting for the completion of VGA power-
		down control (because the VGA
		configuration can not be seen)
		Processing of RESUME for PCI

		Recovery of FDC

		Checks slots that were in ON status during
		suspending ( for fingerprint identification)
		Recovery of PCMCIA card

		Error when an ATA card is pulled out
		Resume error 7BH
		Executing of dividing process of device
		detection of PC card
		Initializing COM

		Initializing FIR

	Check of HDD pack connection	Resume error 72H when HDD is mounted

	Start of IDE device resume sequence

23h	Recovery of user alarm setting and	(only one time)
	cancel of alarm power-on function
	Initializing buffer for power saving

	Initializing EC and start of reading
	battery information
	Recovery of each device (2)	Setting items to be set up

		Initializing DMAC

		Initializing printer mode

	Recovery of display system, but not	(only when internal VGA is enabled in
	displayed	suspending)
24h	Processing of password for RESUME

2-35