Toshiba A10 manual Replacement Procedures MDC Modem, Removing the MDC Modem

4 Replacement Procedures 4.5 MDC Modem

4.5MDC Modem

Removing the MDC Modem

The following describes the procedure for removing an MDC modem (See Figure 4-9).

CAUTION: The power must be turned off when you remove the MDC modem. Removing an MDC modem with the power on risks damaging the modem or the computer itself.

1.Turn the computer upside down.

2.Remove the screw fixing the MDC slot cover and remove the cover. (This screw is fixed to the MDC slot cover and can not be removed.)

3.Remove the following screws fixing the MDC modem.

• M2x4 BIND screw x2

4.Lift up the MDC modem and remove the MDC modem from the connector PJ3000 on the system board.

5.Remove the MDC jack cable from JP1 on the MDC modem.

MDC Slot Cover Screw

M2.5x4 THIN BIND

JP1

MDC Modem

MDC Jack Cable PJ3000

Figure 4-9 Removing MDC Modem

4-18 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)