Toshiba A10 manual Replacing 15.0 Inch Sharp fluorescent lamp XGA

4.18 Fluorescent Lamp 4 Replacement Procedures

5.Place the lens sheet (L) and upper diffusion sheet (K) on the backlight unit with light guide.

(K)Upper diffusion sheet

(L)Lens sheet

(M)Light guide

Make sure there is no dust or scratch.

Do not make any sheet over the edge of P-chassis.

Figure 4-122 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (16)

6. Place the LCD panel (I) on the backlight unit (H).

NOTE: Make sure there is no dust between the LCD panel and backlight unit. If any dust is found, remove it with crepe tape or others which has no remaining of paste.

	(I) LCD panel
			Guide rib	Guide rib
(H) Backlight unit
		Guide rib		Guide rib

Make sure the LCD panel is installed in the guide rib surely.

Figure 4-123 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (17)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-123