Toshiba A10 manual Replacement Procedures Fan Module/Cooling Fin/CPU

4 Replacement Procedures 4.7 Fan Module/Cooling Fin/CPU

4.7Fan Module/Cooling Fin/CPU

NOTE: If silicon grease has already been applied to the CPU and fan module, wipe clean with a cloth and apply new silicon grease. The computer will not operate correctly if the CPU is not firmly in contact with the fan module.

Removing the Fan Module/Cooling Fin/CPU

The following describes the procedure for removing the fan module/cooling fin/CPU (See Figure 4-12 to 4-16).

1. Remove the following screws fixing the CPU cover and remove the CPU cover.

•	M2.5x5	THIN BIND screw	x2
•	M2.5x16	THIN BIND screw	x1

CPU Cover

M2.5x5 THIN BIND

M2.5x16 THIN BIND

Figure 4-12 Removing CPU Cover

4-22 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)