Toshiba A10 manual Display Assembly Replacement Procedures, Removing the Display Assembly

4.10 Display Assembly 4 Replacement Procedures

4.10 Display Assembly

Removing the Display Assembly

The following describes the procedure for removing the display assembly (See Figure 4-24 to 4-26).

1.Open the display and disconnect the LCD cable from PJ5600 on the system board.

2.Pull out the insulator covering the speaker connectors from the chassis and turn up the insulator. Disconnect the speaker cables (Blue, Red) from PJ6000 and PJ6001 respectively.

LCD Cable

PJ5600

Left Speaker Cable (Blue)

Insulator

PJ6000

PJ6001

Right Speaker Cable (Red)

Figure 4-24 Removing Display Assembly (1)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-35