3.14 Expansion Test

3 Tests and Diagnostics

Subtest 03 RGB monitor ID test

Connect a CRT monitor to the computer for the test of ID acquisition.

To check whether the ID is acquired or not is judged by the data from the monitor. Therefore, this test will fail when it is performed in simultaneously display mode or panel display mode. Make sure the CRT used for this test is the one with ID and only the CRT is selected for display device before the test.

Satellite A10/TECRA A10/Satellite Pro A10 Maintenance Manual (960-445)

3-35

Page 150
Image 150
Toshiba A10 manual Expansion Test Tests and Diagnostics