Toshiba A10 manual Mini PCI Card Replacement Procedures, Installing the Mini PCI Card

4.6 Mini PCI Card 4 Replacement Procedures

3.Remove the glass tape and disconnect two wireless LAN cables from JP1 and JP2 on the mini PCI card.

4.Open the left and right latches holding the mini PCI card and remove the mini PCI card.

Latches

Wireless LAN Antenna Cable

Mini PCI Card

The position for connecting the wireless LAN cable (White, Black) is different from each model.

Figure 4-11 Removing Mini PCI Card

Installing the Mini PCI Card

The following describes the procedure for installing a mini PCI card (See Figure 4-10, 4-11). The explanation in this section uses a model with wireless LAN as an example.

1.Insert the mini PCI card terminals at 45-degree slant into the connector on the computer and press the mini PCI card from the top to secure.

2.Connect the white and black wireless LAN cables to the J1 and J2 terminals respectively on the mini PCI card. Then stick the glass tape on the cables.

3.Attach the mini PCI slot cover and secure it with the following screw.

• M2.5x4 BIND or OSG x1

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-21