4.7 Fan Module/Cooling Fin/CPU

4 Replacement Procedures

NOTE: Apply the silicon grease enough to cover the chip surface using the special applicator. When installing the fin, make sure the bottom of the fin covers the top of CPU.

CPU Chip

Figure 4-18 Applying Silicon Grease

5.Install the cooling fin.

6.Place the CPU holder on the cooling fin with its holes (small and large) attached to the bosses of the cooling fin. Fix the CPU holder with following screws in the order of the marks (1 to 4) on the CPU holder.

• M2x6

BIND screw

x4

7.Connect the fan module cable to PJ8770 on the system board.

8.Install the fan module and fix it with the following screws.

• M2.5x5 THIN BIND screw

x2

9. Attach the CPU cover and fix it with the following screws.

M2.5x5

THIN BIND screw

x2

M2.5x16

THIN BIND screw

x1

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)

4-27

Page 233
Image 233
Toshiba A10 manual Applying Silicon Grease