Toshiba A10 manual After a few seconds, the following message will appear

3.17 Sound/LAN/Modem Test 3 Tests and Diagnostics

Subtest 03 Modem Test

For this subtest, connect the modem PCB and RJ11 connector with a harness.

This subtest contains the following tests. Use the dedicated “FAT-MODE inspection device (product code: QE2000P01 made by Nitto Denki Seisakusyo)” for the tests.

Select 4 to execute and press Enter. The following message will appear:

ICHx MDC Test Program with Modem Sound ( PCB Interface ) Version X.X

* Scorpio		Modem Initialize		:OK
*	Digital	Loopback	Test	:OK
*	Modem Sound Test			:( Operator’s Check!! )

After a few seconds, the following message will appear:

...Press Key ( Y = OK , N =NG )

If you hear the modem sound from the speakers, press Y. Otherwise, press N.

NOTE: The menu displayed by your computer may be slightly different from the one shown above.

After you press Y or N, the RJ11 Connection Check (LED) (Operator’s Check LED) test will be executed, and the following message will appear:

...Press Key ( Y = OK , N =NG )

If the color in the LED of the connection checker is orange, press Y.

Otherwise, press N.

Satellite A10/TECRA A10/Satellite Pro A10 Maintenance Manual (960-445) 3-41