Printer port LED boot mode status 5/8, Rom

Table 2-3 Printer port LED boot mode status (5/8)

LED Status	Test item	Contents

06h		Saving memory configuration to buffer
		Reading of EC version
		Update of flash ROM type

		Judging of destination (Japan or except Japan)
		based on DMI data
		CMOS default setting check (Default set if Bad
		battery, Bad checksum (ROM, CMOS) is
		detected)
		ACPI table initialization (for execution of option
		ROM)
		Initialization of devices which need initialization
		before PCI bus initialization
		AC’97 control

		Initialization of temperature control information
		KBC initialization
		VGA display off, Reset control
		Sound initialization
		PC multi-box status acquisition
		HC initialization, USB Device recognition and
		initialization
		Control of built-in LAN permission/prohibition
		PIC initialization
		PIC test
		Password Initialization
07h		PCI bus initialization (connection of DS Bus)
		Initialization of LAN information
		WakeUp factor check
08h		Task generation for waiting INIT_PCI
		completion
		CMOS data initialization (2)
		PnP initialization
		Setting of setup items
		Waiting for the completion of Multi-box status
		check
		H/W setting based on PnP resource

2-25