Toshiba A10 manual All Devices

3.27 SETUP 3 and Diagnostics

NOTE:

1.Do not remove the AC adaptor and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option.

2.If you have set a password and the computer boots by the Auto Power On function and Resume is on, the computer will start with the instant security function enabled. The password = message is not displayed; however, you must enter the password to use the computer.

3.This option is enabled only once, the setting is reset, after booting up.

(f)Panel Power On/Off

This option is displayed in the resume mode.

Enabled	Enables the Panel Power On/Off.
Disabled	Disables the Panel Power On/Off. (Default)

8.Configuration

This option lets you set the device configuration.

All Devices	BIOS sets all devices.
Setup by OS	Operating system sets devices that it can control.
	(Default)

NOTE: When using installed OS, selecting “Set by OS” is recommended. But, when setting “PC CARD-Controller Mode” to other than “ Auto- Selected”, select “ All Devices”.

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 3-79