Toshiba A10 manual LCD Unit/FL Inverter Replacement Procedures, Removing FL Inverter and LCD Unit

4.16 LCD Unit/FL Inverter 4 Replacement Procedures

3.Peel off the mask tapes from the sides of the display and remove the following screws fixing the LCD unit.

• M2x4 SUPER THIN BIND screw x4

4.With the bottom edge of the LCD unit resting on the display cover, lift the top edge of the LCD unit. Peel off the glass tape and disconnect the LCD cable from the connector on the back of the LCD.

5.Remove the following screw fixing the FL inverter.

• M2x4 SUPER THIN BIND screw x1

6.Remove the insulator and disconnect the two cables from the connectors CN1 and CN2 on the FL inverter and remove the FL inverter.

7. Remove the LCD unit from the display cover.

FL Inverter Mask Seal

M2x4 SUPER THIN BIND

CN1

CN2

Insulator

Mask Seal

Glass Tape

LCD Cable

Mask Seal

M2x4 SUPER THIN BIND

M2x4 SUPER THIN BIND

Mask Seal

Figure 4-35 Removing FL Inverter and LCD Unit

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-51