Toshiba A10 manual Replacing 15.0 Inch Sharp fluorescent lamp SXGA+

4.18 Fluorescent Lamp 4 Replacement Procedures

11. Stick the protection cover S (A), fixing tape (C), fixing tape for lead wire (D).

Stick to the side of the bezel.

Fit the cover according to the outline of the screw.

Make sure the lead wire is closely attached to the bezel.

Fit the cover according to the outline of the screw.

(A)

		0 to 1 mm
(D)	(C)		Do not make the tape over the
			top of the module.

0 to 0.5 mm

The tape MUST NOT appear on the display.

Stick the tape according to the outline of the module. Make sure the tape does not appear on the side of the module.

Stick the fixing tape at the center of the module.

Figure 4-176 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (24)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-159