Toshiba A10 manual Replacing 15.0 Inch Sharp fluorescent lamp XGA

4.18 Fluorescent Lamp 4 Replacement Procedures

4.18.8 Replacing the 15.0 Inch XGA Sharp Fluorescent Lamp

Disassembling the 15.0 Inch XGA Sharp Fluorescent Lamp

To disassemble the 15.0-inch XGA Sharp fluorescent lamp, follow the steps below and refer to figures 4-107 to 4-116.

1.Turn the LCD module face down, and remove the protection cover S (A), protection cover G (B), fixing tape (C) and fixing tape for lead wire (C).

NOTE: 1) Be careful not to damage the TCP or chips.

2) The protection cover G is reused. Discard the other tapes removed.

(A) Protection cover S

(C) Fixing tape

(C) Fixing tape for lead wire

(B) Protection cover G

Figure 4-107 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (1)

Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445) 4-113