Toshiba A10 manual Ecp

3 and Diagnostics 3.27 SETUP

(b)Parallel Port Mode

Use this option to set information of ECP and Standard Bi-directional.

ECP	Sets the port mode to Extended Capabilities Port (ECP).
	For most printers, the port should be set to ECP. (Default)
Std. Bi-Direct.	Sets the bi-directional setting. This setting should be used
	with some other parallel devices.

NOTE: When the Windows is used, the setting in “Toshiba HW setup” has the priority. The setting in “Parallel Port Mode” is ignored.

(c)Hard Disk Mode

Use this item to select the hard disk mode.

Enhanced IDE (normal)

Select this mode when the HDD is used for MS-DOS,

Windows 95/98/2000/XP, or OS/2. (Default)

Standard IDE Select this mode when using an OS which does not support the Enhanced IDE. When this mode is selected, up to 528MB is logically available and the rest of the capacity is not usable.

NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the setting, you will have to reformat the hard disk for the appropriate setting.

14.LEGACY EMULATION

(a)USB KB/Mouse Legacy Emulation

This option sets the Legacy support condition of the USB keyboard and the USB mouse.

Enabled Enables LEGACY support. (Default)

USB keyboard/USB mouse are available without the driver.

Disabled Disables LEGACY support

3-82 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)