Toshiba A10 manual Tests and Diagnostics Sound/LAN/Modem Test

3 Tests and Diagnostics 3.17 Sound/LAN/Modem Test

3.17 Sound/LAN/Modem Test

To execute the Sound/LAN/Modem Test, use the Diagnostics disk (No.2). Finish the tests of the Diagnostics disk (No.1) by selecting 99 - EXIT TO DIAGNOSTICS MENU in the DIAGNOSTIC TEST MENU. Then in the DIAGNOSTICS MENU, select 9 - EXIT TO MS- DOS.

Insert the Diagnostics disk (No.2) in the floppy disk drive and turn on the power while pressing F or U (when the USB FDD is used). The following message will appear:

###################################################################

####### XXXXXX DIAGNOSTICS PROGRAM (SOUND/LAN/MODEM TEST)########

###################################################################

*	1	…………………………	(Microphoned recording&play)	*
*	2	…………………………	(Sin wave)	*
*				*
*	3	…………………………	(LAN)	*
*				*
*	4	…………………………	(MODEM)	*
*				*

*******************************************************************

.. Press test number[1-4] ?

Press the number you want to test and press Enter.

NOTE: To execute Subtest 01, the external microphone and headphone are required. The system is capable of producing high volume sound, so when you use the headphones be careful to set the volume low and adjust it as necessary. Using the headphones at full volume could damage your ears.

To execute a subtest continuously, select the test number and press Enter. To exit the Sound/LAN/Modem test, remove the test program disk from the FDD (or the USB FDD) and turn off the power.

3-38 Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)